Spikes Tactical mid length 16″ LE Rifle

Sale!

Spikes Tactical mid length 16″ LE Rifle

$975.00 $877.50

Available on backorder

SKU: STR5035-MLS Category: Tags: , , ,

Description

STR5035-MLS_01

Spikes Tactical mid length 16″ LE Rifle

 

Introduction
The Spike’s Tactical ST-15 LE Mid-Length line-up is designed as a fully Mil-spec compliant rifle series for law enforcement. This same level of quality and performance is now available to everyone, all at a price range that is affordable to shooters of any budget. Each component is manufactured to Mil-spec standards and backed by the Spike’s Tactical Lifetime Warranty.

NOTE: Check your state & local laws before ordering to ensure that no modifications are required. Compliance options are available under Services & Tools.

NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@beachtactical.com and include your name and order number on the cover sheet.

Features

  • Spike’s Tactical 16″, 1:7 Twist, Mil-spec Barrel
  • Government Barrel Profile, Mid Length Gas System
  • F-marked A2 Front Sight Base, .750″ Diameter Gas Seat
  • Spike’s Tactical Mil-spec M16 Bolt Carrier Group
  • Mid Length Handguards
  • A2 Flash Hider
  • Mil-spec Lower Parts
  • ST-T2 Tungsten Buffer
  • ST M4 Stock

Included

  • Magpul MBUS Rear Sight
  • Magazine: Due to the recent rampant anti-gun campaign, a magazine no longer comes with this rifle. We ask that you go to the Magazine section and choose one that will be compliant for your state.
  • Hard Plastic Carry Case
  • Spike’s Tactical Lifetime Warranty

Upper Specs

Spike’s Tactical M4 Flat Top Upper Receiver

* CNC Machined from a 7075 T6 MIL-H-6088 Forging

* Extended M4 Feed Ramps Machined before Plating

* Mil-Spec 1913 Picatinny Rail

* MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish

* Laser Engraved T-markings

* Laser Engraved ST Spider logo

* Interior MIL-L-46010 Dryfilm Lube

* Mil-Spec Ejection Port Door Assembly with 5.3.1.2 MIL-STD-171 Phosphate Finish

* Mil-Spec Forward Assist Assembly with Tool Steel Pawl and 5.3.1.2 MIL-STD-171 Phosphate Coating

* Forged Mil-Spec Charging Handle with MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish

Barrel Group

* Barrel Steel is Certified MIL-B-11595E Chromoly Vanadium Alloy

* Raw Barrel Steel is Magnetic Particle Inspected

* Barrels are Stress Relieved

* Mil-Spec M4 Barrel Extension with 5.3.1.2 MIL-STD-171 Phosphate Finish

* 1.2.2.2 MIL-STD-171 Hard Chrome Chamber

* 1.2.2.2 MIL-STD-171 Hard Chrome Bore

* 5.56mm Nato chamber

* All Chambers are Individually Checked for Head Spacing Before and After Plating

* All Barrels are Individually High Pressure Tested (HPT) and then Individually Magnetic Particle Inspected (MPI)

* 5.3.1.2 MIL-STD-171 Phosphate Finish on the Barrel Exterior, Including under the Front Sight Base

* 1/2×28 Thread Pitch

* Threads are Cut Concentric to the Bore

* Forged F-Marked A2 Front Sight Base with Bayonet Lug and 5.3.1.2 MIL-STD-171 Phosphate Finish

* FSB is Taper Pinned to the Barrel and Vertically Aligned

* Rubber Coated Front Sling Loop

* Mil-Spec 303 Stainless Steel Gas Tube enhanced with Melonite Finish

* Muzzle Devices are Properly Timed and installed with Crush Washer

Fore End Group

* Mid Length Hand Guards

* Triangle Hand Guard Cap with 5.3.1.2 MIL-STD-171 Phosphate Coating

* Mil-Spec Barrel Nut with 5.3.1.2 MIL-STD-171 Phosphate Coating

* Mil-Spec Delta Ring with MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish

Bolt Carrier Group

* Mil-Spec 8620 Tool Steel M16 Bolt Carrier with Shrouded Firing Pin

* Carrier is 5.3.1.2 MIL-STD-171 Phosphate Coated inside and out with 1.2.2.2 MIL-STD-171 Hard Chrome Bore

* Laser Engraved with ST Spider Logo

* Mil-Spec Tool Steel Carrier Key

* Carrier Key is 5.3.1.2 MIL-STD-171 Phosphate Coated inside and out with 1.2.2.2 MIL-STD-171 Hard Chrome Bore

* Carrier Key is installed with Grade 8 Hardware and Properly Staked

* Bolt is CNC Machined from Carpenter-158 Steel

* Bolt is 5.3.1.2 MIL-STD-171 Phosphate Coated inside and out

* All Bolts are Shot Peened per current Mil-Spec Requirements

* All Bolts are Individually High Pressure Tested (HPT) and then Individually Magnetic Particle Inspected (MPI)

* Tool steel Extractor is Shot Peened, 5.3.1.2 MIL-STD-171 Phosphate Coated, Fitted with a Mil-Spec Black Extractor Spring Insert and Mil-Spec Viton O-Ring

* Mil-Spec Firing Pin with 1.2.2.2 MIL-STD-171 Hard Chrome Finish

* Mil-Spec Cam Pin with 5.3.1.2 MIL-STD-171 Phosphate Coating

* Mil-Spec Firing Pin Retaining Pin with 5.3.1.2 MIL-STD-171 Phosphate Coating

Lower Specs

Spike’s Tactical Lower Receiver

* CNC Machined from a 7075 T6 MIL-H-6088 Forging

* Low Shelf for RDIAS

* Milled Manufacturer Engravings

* Accepts .154″ Diameter Trigger & Hammer Pins

* MIL-A-8625F Type III Class 2 Hardcoat Anodized Finish inside and out

Lower Parts Kit Group

* Semi-Auto Lower Parts Kit with Rounded Hammer

* All Components are Manufactured to Applicable Mil-Spec Requirements

* Trigger and Hammer Engagement Surfaces have been Jeweled/Polished during the Manufacturing Process

* .154″ Diameter Stainless Steel Trigger & Hammer Pins with Black Oxide Finish

Receiver Extension Group

* 7075 Mil-Spec Receiver Extension (Buffer Tube)

* Receiver Extension is 1.14″ in Diameter, 6 Position

* Receiver Extension is MIL-A-8625F Type III Class 2 Hardcoat Anodized and MIL-L-46010 Dryfilm Lubed inside and out

* Mil-Spec Castle Nut with 5.3.1.2 MIL-STD-171 Phosphate Coating

* Castle Nut is Torqued to 38ft-lb.

* Mil-Spec Latch Plate with 5.3.1.2 MIL-STD-171 Phosphate Coating

* Latch Plate is Properly Staked per Mil-Spec Requirement

* ST-T2 Tungsten Heavy Buffer

* Mil-Spec 17-7 Stainless Steel Buffer Spring

* Mil-Spec M4 Stock with ST Spider Logo

* Sling Loop & Hardware has been properly Heat Treated and 5.3.1.2 MIL-STD-171 Phosphate Coated

Additional information

Weight 20 lbs